You are here: Home » Products » Infrared-temperature-sensors » Metis » Mi16


Pyrometer Series Metis MS with silicon and Metis MI with indium gallium arsenide detector operate at the near end of the infrared spectrum. They are an excellent choice for measurement of ferrous and non-ferrous metals above 120°C because the emissivity of un-oxidized metal surfaces is higher at shorter wavelengths. Other major advantages are the lower sensitivity for changes in emissivity at shorter wavelengths, the small spot sizes, the fast exposition time and the digital signal processing which allow the pyrometer to operate over very wide temperature ranges. This makes these units preferable for other applications, too. Optical and electronic parts are housed in rugged IP65 extruded aluminium casting to operate in harsh industrial environments.

Lenses and Fibre-Optic Cable:The infrared energy radiated by the target is centered either directly on the detector (standard version) or on one end of a fibre optic cable by focusable lenses. This feature offers the possibility to measure a small spot (focused) or the average of a bigger spot (out of focus). Lenses are made ofBK7, an optical glass which is highly transparent in the spectral region of Metis MS and MI. If additional windows are necessary, they must offer similar optical characteristics. Fibre-optic versions are supplied with 2.5 m long single mode fibres, diameter 0.2 mm, (0.4 mm MI18 only). Longer cables are available on request.

Optical Alignment:Metis MS and MI Standard Pyrometers are available with 3 different solutions for aiming the sensor onto the target. Number one and most popular method is the built in laser pointer which is also helpful for focusing. Number two is a sight through optics version with reticle-defined target which is advantageous for applications where aiming onto hot, incandescent targets is needed. The viewing telescope of these units, with full scale temperatures above 1800°C, is equipped with a dimmable sight attenuation filter to protect the eye. And finally, the third solution is a build in b/w video camera for all applications where neither the laser nor the sight through version can be used. This feature offers also possibilities for remote controlling of the heating process in dangerous environments. The fibre-optic version of Metis can be equipped with laser pointer only.

Download Metis MS09, MI16, MI18 “Self Contained” Pyrometer technical specifications



787 Susquehanna Avenue
Franklin Lakes, NJ 07417
Tel: 201-485-8773
fax: 201-485-8770
Scott Nagle
Rich DeMaddalena


PROCESS SENSORS CORP. (Corporate Headquarters)
113 Cedar St
Milford, MA 01757
Tel: 508-473-9901
Fax: 508-473-2606



© 2017 Process Sensors Corp.