Non-Contact Infrared Temperature Measurement

Application Analysis Form

If you prefer, you may download this form in PDF format and fax or mail to us. You will need Adode Acrobat Reader to view this PDF form. Acrobat Reader is free and is available at www.adobe.com

All fields are required.
First Name
Last Name
Company
Address
City
State	ZIP
Phone
Email

Analysis completed by:

Customer Rep New Application Customer using Infrared

Features Desired
	Display: Analog Digital None
	Output: mA mV Volts T/C
	Control Capability: None On/Off Ramp/Soak Proportional (PID) 4-20mA output

Target Information

A. Process description:

B. Nature of target surface (material name, size, shape, color, surface condition) as seen by the sensor:

C. Temperature range from ° to °
critical temperature °

D. Type of Coil Design helix pancake channel other shape

E. Target sighting through coils; spacing between coils
outside coils, insulation thickness/hole size through coils: none thickness hole size (max)

F. Desired target size inches mm at distance

G. Distance between IR Sensor & Target Min Max

H. Target is Stationary Moving at per minute

I. IR Sensor speed of response required milliseconds

J. Interference between sensor & target:
Dust Smoke Water Vapors Other

K. Target is: In a vacuum behind a window (type & size)

L. Desired sensor of choice:
non-fiber optics
fiber optics, length of fiber optic cable foot

M. Preferred method of aiming: Thru-lens sighting Laser Video output

N. Integral IR sensor temperature display/optional: Required Not Required Quote

Environmental Conditions

A. Ambient temperature at sensor's installation location:
° Min. ° Max.

B. Atmospheric contaminants:
Dust Smoke Steam Other
Periodic Continuous

C. Distance between sensor and electronics (2 piece sensor systems only): Min Max

D. Is Strong FRI, EMI radiant present? yes no