What is Induction Heating? What are its benefits?

Induction heating is the process where an electrically conductive workpiece is placed in a copper coil through which an alternating current flows.The magnetic field created by this alternating current causes current to flow within the workpiece.Since the workpiece has an inherent electrical resistance to the current flow, heat is generated.The induction heating principle is traced back to that of the transformer effect. The primary winding is the coil and the secondary winding is the workpiece.

Induction Heating Benefits

  • Rapid Heating
  • Rapid Startup
  • Environmentally Sound
  • Reduced Scale
  • Energy Savings
  • Fewer Defective Parts
  • Increased Productivity
  • Greater Consistency
  • Lower Maintenance

Metis Series

  • 1 and 2 color Pyrometers
  • High Accuracy/Repeatability
  • Self Contained with Adjustable Focus Optics
  • Laser, Through Lens or Video Sighting
  • Digital and Analog Outputs
  • Fast Response and Small Spot Size
  • Fiber Optic Versions

PSC Sirius

The Sirius line of Pyrometers was developed to meet the growing demand for small, compact and easy-to-install sensors with first-class optical and electronic characteristics. Sirius-Pyrometers provide digital/analog outputs and operate at short wavelengths, therefore are an excellent choice for measurement of ferrous and non-ferrous metals above 250°C.

PSC-G40N/PSC-S40N (2-Wire Loop Powered 4-20mA Sensors)

  • Self Contained, Rugged S. Steel Construction
  • Laser or Green LED ( 4 wire operation )
  • Digital communication with Software
  • Built-in Peak Picker Circuitry
  • S. SteeI Water Cooling jacket / air purge ( Optional)
  • Fiber Optic Version

PSC-SSS-1M/2M/3M & PSC-SSS-Laser-1M /2M/3M

  • Low Cost OEM Sensors
  • Ultra Small Sensor Head or Dual Laser Aiming Version
  • Short Wavelength for Best Accuracy, 0.3% of reading
  • Multiple Outputs/Alarms
  • Ethernet communications ( Optional)
  • Built-in Temperature Display
  • High Ambient Temperature Rating of Sensor-up to 120° C

PSC-SF30NG/ PSC-SF34 NG Low Cost Fiber Optic Model

  • Wide temperature range from 600°C to 1800°C
  • Loop-Powered sensor with 4-20mA output (DSF-30NG)
  • Simple installation and operation
  • Robust air purge design for maintenance-free operation
  • Digital RS485 communications (DSF-34NG Version)
  • Integrated peak picker

PSC-CS-Laser-2MHDigital, Self Contained Pyrometer

  • High Accuracy, High Repeatability
  • High Resolution Optics with Dual Laser for Precision Targeting
  • Loop powered or 4 wire design ( for use with Laser operation)
  • On-Board or Remote Emissivity Adjustment
  • Fast Speed of Response with Alarm Output
  • PSC Connect software for IR sensor parameter configuration
  • Stainless Steel Construction

 

Process Thermal Imaging Systems

  • High resolution for process measurement and control
  • UPFAdetector (640×480 array)
  • Real time operation….30Hz
  • Digital communication and multiple 4-20mA outputs (optional)
  • Used for profiling/controlling temperature of metal slabs
  • Multiple alarms – Regions of Interests (ROI’s)

PTI-170L-HT

  • -4°F to 2732°F (-20°C to 1500°C)
  • Manual Focusable Optics 300mm to Infinity
  • Hot / Cold Spot Detection ( up to 4 spots ) with Audible Hi/Lo Alarms
  • Onboard CCD camera-640X480 pixels, full color
  • Video output-PAL and NTSC formats
  • Real Time 60HZ Frame Rate
  • Accuracy: ± 2°C or ± 2% of Reading
  • Laser Pointer & Darkness Illuminator
  • Large 3.5″ LCD display, Color VGA 640 X 480
  • Palettes: 6 different selections
  • High Capacity Memory storage: Up to 2G on removable SD Card
  • Light Weight ( 650g )
Process Sensors Corporation offers a wide range of high performance non-contact infrared temperature measuring products for Induction Heating Applications

MQ11 (2-color)
MQ22 (2-color)
MI18, MI16, MS09
MP23
MP25
Galaxy System Scanner
SI16 & SS09
PI16 & PS09
PSC-G40N, PSC-S40N
PSC-GF40N, PSC-SF40N (Fiber Optic Model)
PSC-G44N, PSC-S44N
PSC-GF44N, PSC-SF44N (Fiber Optic Model)
PSC-SF30NG, PSC-SF34NG (Fiber Optic Model)
PSC-CS-Laser-2MH, Cooling Jacket (optional)
PSC-SSS-Laser-1M/2M
PSC-SSS-Laser-3M
PSC-SSS-1M/2M
PSC-SSS-Ratio-1M (2 color/Fiber Optic)
PTI-170L-HT
PTLST (portable)
Thermal View 640N Compact

Download Application Analysis Form


Request a Demo